25
2020
-
12
Jewelry customization: needle insertion and processing technology
Jewelry custom needle setting refers to the process of using a small shovel made of sewing needles to pick up copper pieces, and then further scraping to create a metal material mound that attracts beads and turns into a round and shiny small nail at the top. The fixed crystal is fixed according to the extrusion molding of the small nail.
Li Xin recommends the needle insertion and embedding processing process:
Among the many embedding methods used in jewelry processing, nail setting is a highly challenging one. In addition to practical methods, due to the small size of the individuals who shovel the nails, it is also required that the operators have good eye vision. Another key use of this method is to embed crystals with a round multiple diamond shape. The size of the crystals is relatively small, and the embedded bare diamond generally does not exceed three parts. The large size of the embedded stones can easily lead to difficulties in their robustness. According to the total number and characteristics of the raised nails, there are common nails (also known as double nails), two nails, three nails, four nails, osmanthus nails, and random nails. Among them, the two nails can be divided into dead head nails and diagonal nails, and the methods of classifying the raised nails are slightly different.
When processing a piece of decoration with silver jewelry, a large number of starting nails and inlaid stones are usually used, even if they are composed of two or three nails. In this way, the sorting of each inlaid stone can display a variety of common key line type sorting, symmetry sorting, triangle sorting, surface type sorting, standard sorting, and irregular sorting, which all lay a very good foundation for the processing technology to achieve the diversity of design schemes.
For nail plate inlay, there is not only a difference but also an inseparable connection with nail plate inlay. Nail plate inlay is initiated by the plate setter, and then the embedding process is carried out by the embedding technician; Nailing and embedding are carried out by the embedding engineer. In terms of the method of lifting nails, the two are the same. In the embedding process of nail plate inlay, the nails have already been taken in advance, and are only carried out according to the process of car inlay, stone laying, nail fixing, and using suction beads to suck nails; Nail setting is carried out according to the process flow of car setting mouth, stone setting, nail fixing, and using suction beads to absorb nails.
It can be said that nail plate inlay is only a component of the nail inlay process, and due to the lack of nail inlay stage, the entire process of embedding is becoming simpler and very easy to operate in practice. Although in some jewelry production, rough edge inlay is described as an independent embedding method, and the appearance of rough edge inlay is significantly different from other embedding methods with certificates. However, in terms of contact inhibition of crystal stones, a steel shovel is used to symmetrically lift four nails to contact inhibition crystal stones. Therefore, rough edge inlay belongs to a unique type of nail inlay.
The above is the content collected by Yichang Lixin Jewelry Technology Co., Ltd. If you need to develop it, please contact us.
Address: Wufeng Ethnic Industrial Park (Baiyang Town, Zhijiang City) Tel: +86-717-6619166 Mobile phone: +86-13168806591 +86-13922325561 E-Mail: sale@zxjew.cn
© COPYRIGHT Yichang Lixin Jewelry Technology Co., Ltd. ALL RIGHTS RESERVED | SEO | Business license Powered by 300.cn
auto